 |
BS4659
BO1
Data sheet available
|
|
A general
purpose oil hardening steel which hardens at a relatively
low temperature with the minimum of distortion.
|
|
BS4659
BD2
Data sheet available
|
|
A high carbon high chromium steel
giving a good hardness with added toughness. This steel
can be vacuum hardened when minimum distortion is required.
|
|
BS4659
BD3
Data sheet available
|
|
A similar steel to BD2 this steel
attains a slightly higher hardness and has good abrasion
resistance.
|
|
BS4659
BA2
Data sheet available
|
|
An air hardening steel which is
easier to machine than BD2 or BD3 but offers high abrasion
resistance with good toughness.
|
|
BS4659
BH13
Data sheet available
|
|
A 5% chromium hot work steel. This
steel is air hardening with very little distortion. It
also can be vacuum hardened, and may be water cooled in
service.
|
|
BS4659
BS1
Data sheet available
|
|
An excellent tough and shock resisting
steel, with good abrasion resistance. When hardened it
has a good cutting ability combined with great toughness.
|
|
BS4659
BP20
Data sheet available
|
|
A pre-hardened high tensile steel
which is readily machineable. It can also give a higher
hardness than its supply condition and can also be nitrided.
|
|
Ground
Flat Stock
Data sheet available
|
|
BS4659 BO1 cold work tool steel,
supplied precision ground to close tolerances. Refer to
our Ground
Flat Stock Standard Sizes
page for a list of our standard ex stock items.
|
|
Silver
Steel
Data sheet available
|
|
A 1%
carbon steel, supplied precision ground to close tolerances.
|
|
High Speed Steel Toolbits
Data sheet available
|
|
High
Speed Steel Toolbits are available in grades M2 and M42.
|
