|
1.2510
|
1.2510 is an oil hardening tool steel which hardens at a relatively low temperature with
minimum distortion.
|
|
1.2379
|
1.2379 is a werkstoff tool steel giving a good hardness with added toughness. This steel
can be vacuum hardened when minimum distortion is required.
|
|
1.2080
|
1.2080 werkstoff tool steel has a high carbon, high chromium content which attains a high
hardness giving good abrasion resistance.
|
|
1.2436
|
1.2436 achieves a high hardness with good abrasion resistance similar to Werkstoff tool steel
grade 1.2080. |
|
1.2363
|
1.2363 is an air hardening wekstoff tool steel. It characteristics are its high abrasion
resistance with good toughness.
|
|
1.2344
|
1.2344 is a hot work tool steel. This Werkstoff tool steel is air hardening with very little distortion.
|
|
1.2550
|
1.2550 is a tough and shock resisting Werkstoff tool steel, with good abrasion resistance. When
hardened 1.2550 tool steel has a good cutting ability with great toughness
|
|
1.2311
|
1.2311 is a pre-hardened high tensile steel which is readily machineable. Also available with a
higher sulpher content as Werkstoff grade 1.2312.
|
|
1.2767
|
1.2767 is a 4 1/4% nickel steel, which achieves a good through hardness. 1.2767 is capable of
taking a good polish and is commonly used as a plastic mould steel.
|
|
1.3343
|
1.3343 is a Werkstoff grade high speed steel, which offers good wear resistance with superior
toughness and machineability.
|
|
1.2083
|
1.2083 is a Werkstoff 13% chromium stainless plastic mould steel which will achieve a high
hardness. It gives a good polish and is resistant to attack from corrosive plastics.
|
|
1.2842
|
1.2842 is an oil hardening tool steel which gives high surface hardness after tempering. |
