Download Full DatasheetPDF Datasheet

605M36 Alloy Steel

605M36 605M36T steel suppliers and stockholders. 605M36T is a high tensile alloy steel supplied as round bar with delivery to the whole of the UK. As a low alloy high tensile steel 605M36T is supplied with a tensile range of 850-1000 N/mm² dependent on the ruling section. 605M36T has a good resistance to shock with excellent ductility and offers relief from temper brittleness. Subject to ruling section larger sizes in 605M36 can be supplied in other conditions such as 605M36R 605M36S and 605M36 as rolled (un heat treated). Offering good ductility it is readily machineable in the supply condition and is an alternative alloy steel grade to other chromium and nickel chromium high tensile steel specifications.

West Yorkshire Steel are suppliers of 605M36T high tensile alloy steel in round bar. This grade is commonly supplied as 605M36T to BS970 specification.

We welcome export enquiries for alloy steel. Contact our sales office and consult our shipping policy for further details.

Alternative grades we supply

709M40T  | 708M40T | 817M40T | 826M40W | 835M30 | 535A99 | 655M13 | 722M24 | 905M39

 

Form of Supply

West Yorkshire Steel are stockholders and suppliers of 605M36 and 605M36T in round bar. Diameters can be sawn to your required lengths as one offs or multiple cut pieces. Centreless ground steel bar can be supplied, providing a high tensile engineering steel precision ground bar to your required tolerances.

Click here to contact our experienced sales team who will assist you with your 605M36T enquiry.

  • Diameter

Click on the headings below for further information

Applications

Commonly used for general engineering applications 605M36/605M36T is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions and spindles.

Carbon 0.32-0.40% Phosphorous 0.035% max
Manganese 1.30-1.70% Sulphur 0.040% max
Silicon 0.10-0.40%
Molybdenum 0.22-0.32%

Heat the steel slowly to 640-660°C, then cool in air.

605M36 is commonly supplied ready heat treated at ‘T’ condition. If further heat treatment is required annealed 605M36 should be heated slowly to 840-870°C and after adequate soaking at this temperature quench in oil. Temper as soon as tools reach room temperature.

Heat the 605M36 carefully to a suitable temperature selected by reference to a tempering chart or table, soak at the temperature for two hours per 25mm of ruling section, then all to cool in the air. Tempering between 250-375°C is not advised as tempering within this range will seriously reduce the impact value.

Condition Tensile
N/mm²		 Yield
N/mm²		 Elongation
%		 Izod
KCV J		 Hardness
Brinell
R 700-850 480 16 28 201-255
S 775-925 585 14 16 223-277
T 850-1000 650 13 35 248-302

(*subject to ruling section)

Heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of alloy steel.

605M36T alloy steel is available with cast and analysis certificate or a BS EN 10204 3.1 mill certificate, please request when placing any orders.

605M36T bar is supplied in accordance with our ISO 9001:2015 registration.

UK Delivery UK Delivery only £35.00
ISO 9001:2015 Registration