1.4541 Stainless Steel

1.4541 stainless steel stockholders and suppliers. 1.4541 is a titanium stabilised austenitic stainless available as bar and plate with delivery to the whole of the UK. The addition of titanium to 1.4541 stainless helps improve its welding properties and the elevated temperature properties of the steel. This stainless steel offers excellent oxidation resistance and corrosion resistance. It offers higher creep and stress rupture properties than 1.4307 austenitic stainless grade. 1.4541 possesses excellent resistance to intergranular corrosion when worked or welded in temperatures with the carbide precipitation range of 427-818°C (800-1500°C).

1.4541 stainless steel is held on stock and can be delivered throughout the UK.  All orders are supplied in accordance with our ISO 9001 accreditation.

Related Specifications  X6CrNiTi18-10

Popular grades we supply  17/4PH | FV520B | S31254 | 904L | 310 | 316 | 440B | 440C | 420 | 410 | 416 | 431 | S31803 | S32760

Form of Supply

West Yorkshire Steel are suppliers and stockholders of sheet, plate and bar. We can guillotine cut pieces to your required sizes. 1.4541 stainless steel round bar is available and diameters can be cut to your requirements. Precision ground steel bar can be supplied, providing a high quality stainless bar to close tolerances.

Click here to contact our experienced sales team who will assist you with your 321 stainless steel enquiry.

  • Sheet
  • Plate
  • Diameter

Click on the headings below for further information

Applications

1.4541 stainless steel is used widely in industries such as automotive, chemical, construction and aerospace. Typical applications are exhaust systems and manifolds, heat exchangers, bellows, oil refinery equipment, furnace parts and firewalls.

Carbon 0.08% max Chromium 17.00-19.00%
Manganese 2.00% max Nickel 9.00-12.00%
Silicon 0.75% max Sulphur 0.030% max
Nitrogen 0.10% max Phosphorous 0.045% max
Titanium 5x(C+N) min to 0.70% max

Stainless steel 1.4541 grade has similar corrosion resistance to that of 1.4307 austenitic grade. However it is better suited for applications where an un stabilised chromium nickel steel, such as 1.4307, would be susceptible to intergranular corrosion. It offers excellent corrosion resistance in most natural waters (rural and industrial), provided the chloride, salt and concentrations of hydrochloric and organic acids are low.

Stainless steel 1.4541 is readily weldable with most welding procedures. Oxyacetylene welding is not recommended due to possible carbon pick up in the weld area. Due to intergranular carbide precipitation 1.4541 can be welded without loss of corrosion resistance and post weld annealing is not normally required, except for service in more extreme conditions. We recommend you contact your welding consumables supplier who should be able to provide you full assistance and information on welding stainless steel.

Heat the 1.4541 slowly and uniformly throughout the section to 1150-1250°C. Re heat as necessary and avoid working below 900°C. Cool in air.

The oxidation resistance of a stainless steel is traditionally termed as the scaling temperature. This is the temperature at which the oxidation rate of a stainless steel becomes unacceptably high. The safe scaling temperature for continuous service of 1.4541 is 875°C. In an oxidising and reducing sulphurous atmosphere the scaling temperature of 1.4541 stainless is lowered.

Temp ºC Density
Kg/m³		 Mean Coefficient
of Thermal Expansion		 Modulus
of Elasticity
kg/mm		 Electrical
Resistivity
Ωmm²/m		 Specific Heat
Capacity
kcalºC
20 7.90 17×10-6 20000 0.7 0.105

Stainless steel 1.4541 grade is available with BS EN 10204 3.1 mill certificate, please request when placing any orders.

1.4541 stainless is supplied in accordance with our ISO 9001:2015 registration.

UK Delivery UK Delivery only £35.00
ISO 9001:2015 Registration